Neat Cutting Oil

Neat Cutting Oils are used undiluted in machining operations mainly for the purposes of extending tool life, smooth surface finishing, flushing of chips and reduction of workpiece deformation. United Neat Cutting Oil series is fortified with various extreme pressure and lubricity agents to obtain the desired workpiece quality depending on the respective types of operation and workpiece material. Product series suited for light to severe operations are available.

UNITED UNINET SFO 704

UNINET SFO 704 is a very light viscosity Super Finishing Oil formulated to offer extra fluidity to ensure excellent flushing action and removal of any material which may cause stone glazing in the honing and grinding processes.

PDS (EN) PDS (EN)

Safety Data Sheet (SAE)

SFO 704

UNITED UNINET SFO 710

UNINET SFO 710 is strongly recommended as the super finishing oil in the machining of aluminum, magnesium and copper alloys. This neat oil is suited for high-speed machining and is designed for light to moderate duty cutting operation.

PDS (EN) PDS (EN)

Safety Data Sheet (SAE)

SFO 710

UNITED UNINET SFO 610

Neat oil specifically designed for high-speed machining and light to moderate-duty cutting operations involving aluminum, magnesium, copper alloys, and other materials.

PDS (EN) PDS (EN)

UNITED UNINET SFO 170

United Uninet SFO 170 is formulated primarily as honing oil for use on steel and high nickel alloys metals. It can also be used as super finishing oil in the machining/ honing of aluminum and magnesium alloys. This neat oil is designed for light to moderate duty machining operations including deep hole drilling and boring.

PDS (EN) PDS (EN)

Safety Data Sheet (SAE)

SFO 170

UNITED UNINET 211

Neat cutting oil formulated for the high-precision autolathes industry, designed for the machining of low-alloy steel, free-cutting steel, and non-ferrous metals.

PDS (EN) PDS (EN)

Safety Data Sheet (SAE)

UNINET 211

UNITED UNINET 213

UNINET 213 is an economical neat cutting oil blended with chlorinated and sulfurized EP additives for machining applications of free cutting, stainless and alloyed steel.

PDS (EN) PDS (EN)

Safety Data Sheet (SAE)

UNINET 213

UNITED UNINET 413

UNINET 413 is an economical neat cutting oil blended with chlorinated and sulfurized EP additives for machining applications of free cutting, stainless and alloyed steel.

PDS (EN) PDS (EN)

PDS (CN) PDS (CN)

Safety Data Sheet (SAE)

UNINET 413

UNITED UNINET TD

UNINET TD is formulated for tapping, deep hole drilling and threading of hard materials such as high nickel/chromium content stainless steel.

PDS (EN) PDS (EN)

Safety Data Sheet (SAE)

UNINET TD

UNITED UNINET TS 30

Sulfurized neat oil specifically designed to meet the machining requirements of small, precise components made from the SUS 420J2 series.

PDS (EN) PDS (EN)

Safety Data Sheet (SAE)

TS 30

UNITED UNINET DH

UNINET DH is formulated with active sulfur and other load-bearing extreme pressure additives so as to prolong tool life, give a good surface finish and increase efficiency.

PDS (EN) PDS (EN)

Safety Data Sheet (SAE)

UNINET DH