Metal Working Fluid

Wide range of MWF such as Soluble Cutting Oil, Forming Oil, Neat Cutting Oil, Quenching Oil, Rust Preventive Oil, Slideway Oil. Formulations that enhanced oxidation stability, improve foam control, maintain excellent stability in the presence of water and provide protection against rust, corrosion and wear. Has a range from very low viscosity with self-evaporating properties that leaves minimum film on components to very high viscosity containing high levels of extreme pressure additives.

UNITED UNIFORM SS 65

Specifically developed with advanced refined mineral oil for metal forming processes, this product provides effective lubrication and surface protection during metal forming operations.

PDS (EN) PDS (EN)

UNITED UNICOAT DWF AT14

This solvent-based, water-displacing fluid forms a thin waxy film that provides outstanding rust prevention and salt spray protection.

PDS (EN) PDS (EN)

UNITED UNICOAT DWF AT20

This solvent-based, water-displacing fluid forms a thin waxy film that delivers excellent rust prevention and salt spray resistance.

PDS (EN) PDS (EN)

UNITED UNISOL-P

Mineral based water-soluble metalworking fluid formulated with fragrance that forms a very stable emulsion when mixed with water at a wide range of dilutions (stability of this emulsion is not affected by hard water ions).

PDS (EN) PDS (EN)

PDS (CN) PDS (CN)

Safety Data Sheet (SAE)

UNISOL P

UNITED UNISOL EP 2

A new generation of biostable emulsion with high oil content. It is a stable soluble cutting fluid that produces a milky emulsion when mixed with water.

PDS (EN) PDS (EN)

Safety Data Sheet (SAE)

UNISOL EP2

UNITED UNIGRIND S2

This product is a biostable, fully synthetic grinding fluid with high levels of corrosion protection at low concentrations and possesses extremely good wheel flushing performance. Due to its unique formulation, it maintains a low foaming tendency and exhibits an ability to remain clean and clear in the presense of tramp oil.

PDS (EN) PDS (EN)

PDS (CN) PDS (CN)

Safety Data Sheet (SAE)

UNIGRIND S2

UNITED UNIDRAW FES 40

Drawing Oil is a low-viscosity, solvent-based, fast-evaporating fluid designed for light- to medium-duty stamping and punching applications.

PDS (EN) PDS (EN)

Safety Data Sheet (SAE)

FES 40

UNITED UNIDRAW NCNP 35

Developed with high-quality refined paraffinic mineral oils for metalworking processes such as wire drawing and deep drawing.

PDS (EN) PDS (EN)

Safety Data Sheet (SAE)

NP 35

UNITED UNIFORM FBH 100

UNIFORM FBH 100 is developed with highly refined mineral oil for the metal forming processes such as drawing, stamping and punching.

PDS (EN) PDS (EN)

PDS (CN) PDS (CN)

Safety Data Sheet (SAE)

FBH 100

UNITED UNINET SFO 704

UNINET SFO 704 is a very light viscosity Super Finishing Oil formulated to offer extra fluidity to ensure excellent flushing action and removal of any material which may cause stone glazing in the honing and grinding processes.

PDS (EN) PDS (EN)

Safety Data Sheet (SAE)

SFO 704