Metal Working Fluid

Wide range of MWF such as Soluble Cutting Oil, Forming Oil, Neat Cutting Oil, Quenching Oil, Rust Preventive Oil, Slideway Oil. Formulations that enhanced oxidation stability, improve foam control, maintain excellent stability in the presence of water and provide protection against rust, corrosion and wear. Has a range from very low viscosity with self-evaporating properties that leaves minimum film on components to very high viscosity containing high levels of extreme pressure additives.

UNITED UNINET SFO 710

UNINET SFO 710 is strongly recommended as the super finishing oil in the machining of aluminum, magnesium and copper alloys. This neat oil is suited for high-speed machining and is designed for light to moderate duty cutting operation.

PDS (EN) PDS (EN)

Safety Data Sheet (SAE)

SFO 710

UNITED UNINET SFO 610

Neat oil specifically designed for high-speed machining and light to moderate-duty cutting operations involving aluminum, magnesium, copper alloys, and other materials.

PDS (EN) PDS (EN)

UNITED UNINET SFO 170

United Uninet SFO 170 is formulated primarily as honing oil for use on steel and high nickel alloys metals. It can also be used as super finishing oil in the machining/ honing of aluminum and magnesium alloys. This neat oil is designed for light to moderate duty machining operations including deep hole drilling and boring.

PDS (EN) PDS (EN)

Safety Data Sheet (SAE)

SFO 170

UNITED UNINET 211

Neat cutting oil formulated for the high-precision autolathes industry, designed for the machining of low-alloy steel, free-cutting steel, and non-ferrous metals.

PDS (EN) PDS (EN)

Safety Data Sheet (SAE)

UNINET 211

UNITED UNINET 213

UNINET 213 is an economical neat cutting oil blended with chlorinated and sulfurized EP additives for machining applications of free cutting, stainless and alloyed steel.

PDS (EN) PDS (EN)

Safety Data Sheet (SAE)

UNINET 213

UNITED UNINET 413

UNINET 413 is an economical neat cutting oil blended with chlorinated and sulfurized EP additives for machining applications of free cutting, stainless and alloyed steel.

PDS (EN) PDS (EN)

PDS (CN) PDS (CN)

Safety Data Sheet (SAE)

UNINET 413

UNITED UNINET TD

UNINET TD is formulated for tapping, deep hole drilling and threading of hard materials such as high nickel/chromium content stainless steel.

PDS (EN) PDS (EN)

Safety Data Sheet (SAE)

UNINET TD

UNITED UNINET TS 30

Sulfurized neat oil specifically designed to meet the machining requirements of small, precise components made from the SUS 420J2 series.

PDS (EN) PDS (EN)

Safety Data Sheet (SAE)

TS 30

UNITED UNINET DH

UNINET DH is formulated with active sulfur and other load-bearing extreme pressure additives so as to prolong tool life, give a good surface finish and increase efficiency.

PDS (EN) PDS (EN)

Safety Data Sheet (SAE)

UNINET DH

UNITED UNINET CS

UNINET CS is specially developed for heavy duty machining processes such as threading, tapping, milling and gear shaping. It is particularly suitable and recommended for the harder-to-machine high alloyed steels. It is formulated with high level of synthetic lubricity as well as sulfurized ester and may not be suitable for machining of non-ferrous or yellow metals.

PDS (EN) PDS (EN)

Safety Data Sheet (SAE)

UNINET CS